Additional Options


Proud sponsor of 

Proud sponsor of
Click for the BBB Business Review of this Hobby & Model Construction Supplies - Retail in Mississauga ON
Home > Air Frames > 3DRobotics >  3DR Parts
Sort By:
Page of 2
Washer M3 Rubber Black
Washer M3 Rubber Black, (Qte: 1pcs)
Our Price: $0.20


Rubber M3 washer. Color: Black
Qte of: 1 pcs

*Picture shows more but this price is just for 1 rubber washer.




M3 Metal Hex Nut with NyLock (qty 4)
Our Price: $0.75

Set of 4 M3 metal hex nuts with Nylock useful when you want to make sure it will stay in place but don't want to use tread lock solution.





M3 metal washers (qte:8)
Our Price: $0.75

Set of 8 M3 metal washers.





M3x30mm Metal Screw (qty 4)
Our Price: $0.75

Set of 4 M3x30mm metal screws.





M3 metal washers (8)
Our Price: $0.80

Set of 8 M3 metal washers.


Please note color could be silver or black



M3 Thumb Nut
Aluminum 6061 M3 Thumb Nut (qty 1)
Our Price: $0.99

One Aluminium M3 thumb nut, used for holding down the stackup on the Arducopter Hexa/Quad 3DR


Weight only 1 gram each, use them anywhere where you need to have quick and easy access to remove an M3 nut.



Deans Ultra Plug Connector, FEMALE
Our Price: $1.00

Female connector. 
Highly efficient, small, lightweight, high-power connector. 

Weight: 0.1 oz; 3 g


Deans Ultra Plug Connector, MALE
Our Price: $1.00

Male connector.
Highly efficient, small, lightweight, high-power connector. 

Weight: 0.1 oz; 3g


Velcro Strips (by the foot)
Velcro Strips (by the foot)
Our Price: $1.00

(4)

Velcro strip sold by the foot, self adhesive.
Ideal to secure your APM, GPS, Radio, Telemetry to the frame.
Also add it to the LiPo and Frame to secure it in place (in addition to the regular LiPo Strap) this will prevent the LiPo to slide and change the Centre of Gravity.

Indicate how many foot you want.
1 = 1 feet (soft and rough sides).







M3x35mm Metal Screw
M3x35mm Metal Screw (qty 4)
Our Price: $1.50

Set of 4 M3x35mm metal screws.





M3 Metal Hex Nut (qty 16)
Our Price: $1.65

(1)

Set of 16 M3 metal hex nuts used on the 3DR frame but can be used where you need them.
Product color may be silver or black.





M3x08mm Black Nylon Spacers (qty 4)
Our Price: $1.75

Set of 4 M3 by 8mm black Nylon spacers





Deans Ultra Plug Connector, PAIR (with Heat Shrink)
Deans Ultra Plug Connector, PAIR (with Heat Shrink)
Our Price: $2.00

1 X Female connector and 1 X Male connector 
Plus free heat shrink tubing.  

Highly efficient, small, lightweight, high-power connector. 

Weight: 0.1 oz; 3 g


M3 Black Nylon Hex Nuts (qty 10)
M3 Black Nylon Hex Nuts (qty 10)
Our Price: $2.20

(3)

Set of 10 M3 black Nylon hex nuts.







M3x6mm Black Nylon Screws (qty 10)
Our Price: $2.25

Set of 10 M3 by 6mm black Nylon screws





M3x25mm Metal Screw (qty 12)
Our Price: $2.39

Set of 12 M3x25mm metal screws.





M3x22mm Zinc Plated Metal Screws (set of 8)
Our Price: $2.45

Set of 8 M3x22mm metal screws - enough to attach 4 motors on the 3DR frame





M3 Thumb Nut
M3 Thumb Nut (qty 1)
Our Price: $2.55

One metal M3 thumb nut, used for holding down the stackup on the Arducopter Hexa/Quad 3DR

You can you it anywhere where you need to have quick and easy access to remove an M3 nut.



M3x5mm Black Nylon Screws (qty 10)
Our Price: $2.59

Set of 10 M3 by 5mm black Nylon screws





M3x5mm Metal Screws (qty 16)
Our Price: $2.75

Set of 16 M3x5mm metal screws - enough to secure the spacers for an entire 3DR quad.





M3x30mm Black Nylon Spacers (qty 4)
Our Price: $2.99

(1)

Set of 4 M3 by 30mm black Nylon spacers





Velcro Battery Strap
Our Price: $2.99

(1)

Official CanadaDrones Velcro Battery Strap. Will fit any frame. extra long to support 6S LiPo





Male T plug - Female XT60 adapter
Male T plug - Female XT60 adapter
Our Price: $2.99

(4)

This adapter mates a male T plug connector a female XT60. Great for handling battery connections!


Female T plug - male XT60 adapter
Female T plug - Male XT60 adapter
Our Price: $2.99

(1)

This adapter mates a female T plug connector a male XT60. Great for handling battery connections!
M3x18mm Black Nylon Spacers (qty 6)
Our Price: $3.25

(2)

Set of 6 M3 by 18mm black Nylon spacers







M3x8mm Metal Screws (qty 8)
M3x8mm Metal Screws (qty 8)
Our Price: $4.50

Set of 8 M3x8mm metal screws





M3x24mm Black Nylon Spacers (qty 6)
Our Price: $4.50

Set of 6 M3 by 24mm black Nylon spacers







M3x12mm Metal Screws (qty 8)
M3x12mm Metal Screws (qty 8)
Our Price: $6.50

Set of 8 M3x12mm metal screws





ArduCopter Carrier plate, v1.0, Black
Our Price: $8.00

ArduCopter Carrier plate (Ideal for X1 frame but compatible with any frames)

Size: 80 x 80 mm
Thickness: 1mm
Material: FiberGlass, black
Qty: 1 pcs
5V/3Amp uBEC tested
jDrones custom low noise 5V/3Amp tested uBEC
Our Price: $8.50

(8)


jDrones Low noise 3A / 5V uBEC (switching regulator)

This is custom made uBEC for jDrones. We made it extra silent, it's ripple current even close to maximum usage is kept really low.

Perfect to supply clean power to your APM! No more brownout from the motor ESC uBec, this is the definitive solution!

Technical Specs:
  • Output: 5V / 3Amp
  • Input: 6 - 23V (will tolerate 6S for short duration but is not recommended for prolonged use)
  • Size: 11 (W) x 26 (L) x 9mm (H)
3DR replacement ARMS set
ArduCopter 3DR Legacy Replacement Arms - RED
Our Price: $8.50

Includes 1 RED replacement arm for ArduCopter 3DR. (280mm long) 
These are the longer arms that were used for the Hexa-A, Quad-A, Quad-B kits.


Technical:
  • Size: 19 x 19mm
  • Thickness: 1mm
  • Length: 280mm
  • Color: Red
  • Weight: 40 gr
QTY: 1 pcs

These arms fits on: jD-Simple frames, 3DR frames (Legacy) , DIY custom frames

3DR replacement ARMS
ArduCopter 3DR Legacy Replacement Arms - BLACK
Our Price: $8.50

Includes 1 BLACK replacement arm for ArduCopter 3DR. (280mm long) 
These are the longer arms that were used for the Hexa-A, Quad-A, Quad-B kits.


Technical:
  • Size: 19 x 19mm
  • Thickness: 1mm
  • Length: 280mm
  • Color: Black
  • Weight: 40 gr
QTY: 1 pcs

These arms fits on: jD-Simple frames, 3DR frames (Legacy) , DIY custom frames

Sonar Mount Version 2 (Long)
Sonar Mount Version 2 (Long)
Our Price: $9.99

(1)

Fits all MaxSonar products sold by 3D Robotics and Canada Drones. 
Keeps your sonar away from electronics. 
Mounts on the Original Arducopter, 3DR, X1 (drilling required) 

Includes all necessary hardware to mount on 3DR-Quad frame, for other frames (hexa or home made) you may need to secure it with tie-wraps. 



Sonar Mount Hexa
Sonar Mount for Hexa
Our Price: $9.99

(1)

Fits all MaxSonar products sold by 3D Robotics and Canada Drones. 
Keeps your sonar away from electronics. 
Mounts on the Original HEXA Arducopter but specifically made for the 3DR HEXA

This mount will not fit on a QUAD

Includes all necessary hardware to mount on 3DR-Quad frame, for other frames (original or home made) you may need to secure it with tie-wraps or drill holes. 



ArduCopter Hexa 3DR Replacement Base Cap
ArduCopter Hexa 3DR Replacement Base Cap
Our Price: $9.99

1 replacement base cap, cap plate only.





3DR replacement ARMS set
ArduCopter 3DR Replacement Arm
Our Price: $9.99

(1)

Includes 1 replacement arm for ArduCopter 3DR. (240mm long)

Looking for longer Legacy arms? (used for the Hexa-A, Quad-A, Quad-B kits)





3DR replacement ARMS
ArduCopter 3DR Replacement Arm - BLUE
Our Price: $9.99

(1)

Includes 1 BLUE replacement arm for ArduCopter 3DR. (240mm long)

Looking for longer Legacy arms? (used for the Hexa-A, Quad-A, Quad-B kits)
    
          BLACK
          RED





ArduCopter Carrier plate, v1.0, Carbon Fiber
Our Price: $11.00

ArduCopter Carrier plate (Ideal for X1 frame but compatible with any frames)

Size: 80 x 80 mm
Thickness: 1mm
Material: Carbon Fiber
Qty: 1 pcs
jDrones MediaTEK Backup Battery tray
jDrones MediaTEK Backup Battery tray
Our Price: $14.99

(1)

jDrones MediaTEK 3329 Backup Battery Tray

If you want instant or almost instant 2D/3D locks on your jD-MediaTEK GPS boards. This addon is a must for you. After you add it under jD-MedieTEK 3329 board, it will provide important power to MediaTEK's internal RTC clock system and helps it to keep track on it's current location. 

After you power up your main jD-MediaTEK 3329 board it will lock in matter or seconds to closest GPS satellites. Without this board lock times can vary from 30-180 seconds. 
Quadcopter Power Distribution Board
Our Price: $15.00

(1)

The ArduCopter 3DR PDB can be used with any frame. It distributes the power from the flight battery to four ESC's to power the quad's motors.

 PDB kit includes:
  • PDB
  • APM cable
  • APM power cable
  • All necessary headers.
  • 6" 14AWG red/black cable for the flight battery.
  • 4 female Deans connectors/ 1 male Deans connector.
  • Shrink tubing for flight battery cables

Assembly instructions in PDF format are here
ArduCopter 3DR Replacement Frame Stackup Plates
ArduCopter 3DR Replacement Frame Stackup Plates
Our Price: $16.99

Set of 2 replacement frame stackup plates for ArduCopter 3DR





ArduCopter 3DR Replacement Legs
ArduCopter 3DR Replacement Legs
Our Price: $16.99

(1)

Set of 4 replacement legs for ArduCopter 3DR





ArduCopter 3DR Replacement Frame Body Plates
ArduCopter 3DR Replacement Frame Body Plates
Our Price: $20.99

Set of 2 replacement center frame plates for ArduCopter 3DR.

* not compatible with Original Arducopter and X1 sets. 



STRONG Replacement Legs - 4 inches clearance
STRONG Replacement Legs - 4 inches clearance (each) - GRAY
Our Price: $22.00

Tired of breaking your plastic / carbon fiber / fiber glass / wood legs?
Well you do understand that something has to give in a rough landing... but some designs seems to be too weak for your style?
Meet the last legs you will need to replace... Arms might bent but these will stay intact (if not my guess is that your entire craft entered terminal velocity... there is not much we can do for that)
STRONG Replacement Legs - 4 inches clearance
STRONG Replacement Legs - 4 inches clearance (each) - GREEN
Our Price: $22.00

Tired of breaking your plastic / carbon fiber / fiber glass / wood legs?
Well you do understand that something has to give in a rough landing... but some designs seems to be too weak for your style?
Meet the last legs you will need to replace... Arms might bent but these will stay intact (if not my guess is that your entire craft entered terminal velocity... there is not much we can do for that)
3DR ArduCopter Replacement Leg (Long version)
3DR ArduCopter Replacement Leg (Long version)
Our Price: $22.99

Set of 4 replacement leg components for ArduCopter 3DR (Will only assemble a pair of legs).

16.5cm tall (when assembled with the quad).




Hexacopter Power Distribution Board
Hexacopter Power Distribution Board
Our Price: $23.99

(1)

The Hexacopter PDB can be used with any frame. It distributes the power from the flight battery to six ESC's to power the motors. Now comes pre-assembled! No need to solder connectors or wires!

 PDB kit includes:
  • PDB
  • APM cable
  • APM power cable
  • All necessary headers.
  • 6" 14AWG red/black cable for the flight battery.
  • 6 female Deans connectors/ 1 male Deans connector.
  • Shrink tubing for flight battery cables

APM Power Module
APM Power Module with XT60 Connectors
Our Price: $25.99

(7)

APM 2.5 Power Module

The APM 2.5 Power Module is a simple way of providing your APM 2.5 with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum of 2.25A from up to a 4S LiPo battery. The Power Module comes completely assembled with XT-60 connectors, and wrapped in shrink tubing for protection.
Full Carbon fiber High rise legs - 20 cm (set of 2)
Full Carbon fiber High rise legs - 20 cm (set of 2)
Our Price: $30.00

(1)

Set of 2 super strong full carbon fiber legs. (you will need 2 kits to get 4 legs)

With 100% carbon fiber,very strong and lightSurface treatment:3K

New model, higher for more clearance, lighter, better!!

1 leg weight 29 grams (compared to the previous model at 40g each)

Once installed real clearance under the center plate is 20cm (around 8 inches)

*Will require drilling.






3DR uBlox GPS with Compass Kit
3DR uBlox GPS with Compass Kit (for APM 2.6 and up)
Our Price: $92.00

(6)

This new design incorporates the HMC5883L digital compass, providing a convenient method of mounting the compass away from sources of interference that may be present in the confines of the vehicle. This is our best GPS module, significantly outperforming the Mediatek GPS due to the larger antenna and next-gen chipset. An excellent solution for multicopters and rovers in particular, where GPS accuracy is paramount. It features active circuitry for the ceramic patch antenna, rechargeable backup battery for warm starts, and I2C EEPROM for configuration storage. The units ship pre-configured for use with 3DR APM 2.6 autopilot; the configuration file is available in the repository.