Additional Options




Secure Electronic Payment Processing
secure online
credit card processing
Proud sponsor of 
Proud sponsor of 
Proud sponsor of 
Home > Air Frames > ArduCopter 3DR
Choose a sub category:
 3DR Frame and Kits
 3DR Parts
Sort By:
Page of 1
ArduCopter HEXA 3DR Frame + Motors Kit
ArduCopter HEXA 3DR Kit - Full Electronics (REV-B)
Our Price: $660.00

(2)

ArduCopter Hexa 3DR - Fully featured UAV development platform.
Frame Revision - B 

This Hexacopter kit is based off the ArduCopter 3DR. With two extra motors the lifting capacity is increased to over 1kg. The PDB still mounts neatly between the base plates but access to it is made easier by thumb nuts that easily unscrew to remove the stackup. This also lets you attach and remove APM with screws more easily. The frame is designed to fit APM1.0 and 2.0 screw holes in + mode. This kit is designed and manufactured at the 3D Robotics headquarters in San Diego, California. 
ArduCopter 3DR-C Quad KIT
ArduCopter 3DR-C Quad KIT, FULL Electronics
Our Price: $510.00

3DR ArduCopter Quad-C  Full Electronics Kit contains the following:

  • 2 Main frame boards + PDB cap.
  • 5 Aluminum arms 
  • 2 Carrier boards 
  • Landing gear 
  • Power distribution board, power cables and signal cables for PDB-APM
  • All hardware needed to assemble the components above
  • 4 Motors
  • 4 ESCs
  • 4 Propellers
  • APM 2.5
ArduCopter HEXA 3DR Frame + Motors Kit
ArduCopter HEXA 3DR Frame + Motors Kit (REV-B)
Our Price: $435.00

ArduCopter Hexa 3DR - Fully featured UAV development platform.

This Hexacopter kit is based off the ArduCopter 3DR. With two extra motors the lifting capacity is increased to over 1kg. The PDB still mounts neatly between the base plates but access to it is made easier by thumb nuts that easily unscrew to remove the stackup. This also lets you attach and remove APM with screws more easily. The frame is designed to fit APM1.0 and 2.0 screw holes in + mode. This kit is designed and manufactured at the 3D Robotics headquarters in San Diego, California. 
ArduCopter 3DR-C Quad KIT
ArduCopter 3DR-C Quad, Motors Kit
Our Price: $285.00

3DR ArduCopter Quad-C  Frame + Motors Kit contains the following:

  • 2 Main frame boards + PDB cap.
  • 5 Aluminum arms 
  • 2 Carrier boards 
  • Landing gear 
  • Power distribution board, power cables and signal cables for PDB-APM
  • All hardware needed to assemble the components above
  • 4 Motors
  • 4 ESCs
  • 4 Propellers
ArduCopter HEXA 3DR Frame
ArduCopter HEXA 3DR Frame only (REV-B)
Our Price: $189.00

3DR ArduCopter Hexa-B Frame KIT contains the following :

  • 2 Main frame boards
  • 1 Main Frame Cap
  • 7 Aluminum arms 
  • 2 Carrier boards  
  • Landing gear 
  • Power distribution board, power cables and signal cables for PDB-APM
  • All hardware needed to assemble the components above
ArduCopter 3DR-C Quad Frame Only
ArduCopter 3DR-C Quad Frame Only
Our Price: $120.00

3DR ArduCopter Quad-C  Frame Kit contains (hardware): 

  • 2 Main frame boards + PDB cover.
  • 5 Aluminum arms 
  • 2 Carrier boards  
  • Landing gear 
  • Power distribution board, power cables and signal cables for PDB-APM
  • All hardware needed to assemble the components above
Full Carbon fiber High rise legs - 20 cm (set of 2)
Full Carbon fiber High rise legs - 20 cm (set of 2)
Our Price: $30.00

(1)

Set of 2 super strong full carbon fiber legs. (you will need 2 kits to get 4 legs) 

With 100% carbon fiber,very strong and lightSurface treatment:3K

New model, higher for more clearance, lighter, better!! 

1 leg weight 29 grams (compared to the previous model at 40g each) 

Once installed real clearance under the center plate is 20cm (around 8 inches) 

*Will require drilling.