Additional Options

Proud sponsor of 

Proud sponsor of

  Home >  Frame and Kits >

ArduCopter Quad v1.1 KIT, Full Electronics
ArduCopter Quad v1.1 KIT, Full Electronics

Alternative Views:

Our Price: $500.00

Quantity in Stock:(Out of Stock)
Availability: Usually Ships in 24 Hours
Product Code: AC-QUAD-KIT-FULL


850KV for normal use
880KV for heavier payloads

Recommended to select 30A ESC with 880KV Motors

Special price, hurry up before it returns to normal!

ArduCopter Quad v1.0 - Fully featured UAV development platform.

This KIT contains almost everything you need to enter to world of multirotors. You only need to add your own Radio, Rx/Tx modules and Battery+Connector, every thing else is provided on this kit.

Frame set is based on famous ArduCopter Quad design by Jani Hirvinen and his team on DIY Drones. 

What ArduCopter is? ArduCopter is a multirotor amateur UAV development platform and is meant for DIY people. Even if you are not a software developer or "hacker" who want to tune everything, you can still enjoy this community product. It also allows people to built their own looking mini UAV or just an ordinary R/C toy, all depends on it's owners needs. You can also program everything on it by your self or use software that is developed by DIY Drones community. Software is updated almost daily. 

jDrones is only part of this software development group at DIY Drones. Support for it is provided on their website on ArduCopter forum areas. 

You can find more information about development status and more:
ArduCopter forums
ArduCopter development wiki
ArduCopter issue tracker
ArduCopter software downloads

ArduCopter Quad v1.1 KIT Contains (hardware):
  • 1 x ArduCopter v1.0 Frame
    • 24" Frame (28cm arms New thicker ones for same price!)
  • 4 x Motors designed to ArduCopter use, 850kv (can be changed)
  • 4 x ESCs designed to ArduCopter use, 20Amp
  • 4 x Propellers designed to ArduCopter use, 10x45 (can be changed)
  • 1 x ArduPilot Mega Flight controller board (latest version APM2.5
Everything else not listed here are optional and ArduCopter can be expanded with them of users can build their own expansions. Eg. this kit does not contain: Camera, Video systems, Batteries, Radio or other devices.

This KIT is a DIY kit, to assemble it you need to have basic soldering skills to solder ESCs cables/Connectors, Power distribution PCB and it's connectors, basic mechanical skills and knowledge to build whole frame.

Needs: Radio, Receiver and Battery to make it flying

Fully assembled ArduCopter Quad v1.1 Weight: 1.3 Kg (with 850kv motors and 10 inches Props)
Payload Capacity: at least 500gr (higher payloads just shortens flight time) 

Documentation can be found from ArduCopter's GoogleCode repository

Share your knowledge of this product. Be the first to write a review »