|
|
|
|
|
|
New ArduPilot Mega 2.5 - Assembled (TOP PINS)
|
8 in stock!
|
|
|
This new presentation of the ArduPilotMega 2.5 system features a newly designed enclosure and Power Module with integrated 5.3V regulator and current and voltage sensing (XT-60 plugs only). The ArduPilot Mega 2.5 is a complete open source autopilot system and the bestselling technology that won the prestigious 2012 Outback Challenge UAV competition. This version is ready to use, with no assembly required. It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints. 
|
|
|
|
|
|
|
|
|
|
New ArduPilot Mega 2.5 - Assembled (SIDE PINS)
|
1 in stock!
(4)
|
|
|
This new presentation of the ArduPilotMega 2.5 system features a newly designed enclosure and Power Module with integrated 5.3V regulator and current and voltage sensing (XT-60 plugs only). The ArduPilot Mega 2.5 is a complete open source autopilot system and the bestselling technology that won the prestigious 2012 Outback Challenge UAV competition. This version is ready to use, with no assembly required. It allows the user to turn any fixed, rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle; capable of performing programmed GPS missions with waypoints. |
|
|
|
|
|
|
|
|
|
PX4FLOW
|
|
Our Price: $155.00
(Out of Stock)
|
|
|
PX4Flow is an optical flow smart camera. It can be freely reprogrammed to do any other basic, efficient low-level computer vision task.
|
|
|
|
|
|
|
|
|
|
APM Power Module with XT60 Connectors
|
|
Our Price: $25.99
(Out of Stock)
(1)
|
|
|
APM 2.5 Power Module
The APM 2.5 Power Module is a simple way of providing your APM 2.5 with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum of 2.25A from up to a 4S LiPo battery. The Power Module comes completely assembled with XT-60 connectors, and wrapped in shrink tubing for protection.
|
|
|
|
|
|
|
|
|
|
AttoPilot Voltage and Current Sense Breakout - 90A
|
|
Our Price: $22.00
4 in stock!
(1)
|
|
|
Description: This is a small voltage and current sense PCB. DC current is determined by measuring a voltage drop across a pair of parallel 1 mOhm shunt resistors, then converted to a final analog voltage output by the TI INA-169. Voltage sense is accomplished by scaling to 3.3V ADC range by a precision resistor divider.
The PCB is supplied without leads or connectors. The pad sizes are large enough to accommodate 12 gauge heavy duty leads (see datasheet) but care must be exercised in soldering. Smaller gauge leads are considerably easier to solder without creating shorts.
|
|
|
|
|
|
|
|
|
|
Moon Gel (4 pads)
|
|
Our Price: $9.99
(Out of Stock)
|
|
|
Moon Gel ! This is the best vibration absorption material.
|
|
|
|
|
|
|
|
|
|
|
|
jDrones custom low noise 5V/3Amp tested uBEC
|
|
Our Price: $8.50
(Out of Stock)
|
|
|
jDrones Low noise 3A / 5V uBEC
This is custom made uBEC for jDrones. We made it extra silent, it's ripple current even close to maximum usage is kept really low.
Perfect to supply clean power to your APM! No more brownout from the motor ESC uBec, this is the definitive solution!
Technical Specs: - Output: 5V / 3Amp
- Input: 6 - 28V
- Size: 11 (W) x 26 (L) x 9mm (H)
|
|
|
|
|
|
|
|
|
|
|
|
Anti-Vibration spacer, M3 x 12mm
|
|
Our Price: $8.00
(Out of Stock)
(1)
|
|
|
Anti-Vibration Spacers, M3 x 12mm
If you have vibrations on your camera, flight controller or other electronics. These are good rubber spacers for you.
Due to their elastic features, these spacers will dampen a lot of vibrations that can affect your electronics.
Technical specs: - Size: M3 x 12mm
- Outside dia: 12mm
- Length: 12mm
Includes: |
|
|
|
|
|
|
|
|
|
|
|
Anti-Vibration spacer, M3 x 8mm
|
|
Our Price: $6.60
51 in stock!
(1)
|
|
|
Anti-Vibration Spacers, M3 x 8mm
If you have vibrations on your camera, flight controller or other electronics. These are good rubber spacers for you.
Due to their elastic features, these spacers will dampen a lot of vibrations that can affect your electronics.
Technical specs: - Size: M3 x 8mm
- Outside dia: 12mm
- Length: 8mm
Includes: |
|
|
|
|
|
|
|
|
|
|
|
Ardupilot Mega 2.5 Case (Side Pins)
|
|
Our Price: $5.99
4 in stock!
(1)
|
|
|
This is the official case for the APM 2.5 system. It's designed to keep your electronics safe while looking great at the same time!
The new APM 2.5 enclosure is made of black translucent ABS plastic. It protects your electronics while allowing access to all pins and connectors. The inside of the enclosure is lined with ESD safe open cell foam to ensure the barometric pressure sensor is surrounded by static air and prevent unwanted readings due to airflow over the sensor. The screws that secure the enclosure have been moved to the top for ease of use.
The enclosure comes in two variants straight pins and angled pins. The side entry variant protects the I/O pins to protect them in the even of a crash.
This option is for the SIDE entry case, depending on your current APM 2.5 set up.
NOTE: This product is compatible with APM 2.5 only! The ArduPilot Mega 2.5 board is not included, it's included in the image only as a reference.
|
|
|
|
|
|
|
|
|
|
Ardupilot Mega 2.5 Case
|
|
Our Price: $5.99
4 in stock!
|
|
|
This is the official case for the APM 2.5 system. It's designed to keep your electronics safe while looking great at the same time!
The new APM 2.5 enclosure is made of black translucent ABS plastic. It protects your electronics while allowing access to all pins and connectors. The inside of the enclosure is lined with ESD safe open cell foam to ensure the barometric pressure sensor is surrounded by static air and prevent unwanted readings due to airflow over the sensor. The screws that secure the enclosure have been moved to the top for ease of use.
The enclosure comes in two variants straight pins and angled pins. The side entry variant protects the I/O pins to protect them in the even of a crash.
This option is for the TOP entry case, depending on your current APM 2.5 set up.
NOTE: This product is compatible with APM 2.5 only! The ArduPilot Mega 2.5 board is not included, it's included in the image only as a reference.
|
|
|
|
|
|
|
|
|
|
APM2.5 Filter PCB. Rev.A
|
|
Our Price: $4.99
1 in stock!
|
|
|
APM2.5 Filter PCB, Rev.A
Dont want a full case for your APM 2.5? Is your barometer fully exposed and you don't know how to cover it properly. With APM25 Filter PCB this is done in easy way for you. Just connect filter PCB to existing pins and your barometric sensor will get covered by foam.
Includes: - 1 * APM2.5 Filter PCB
- 2 * 2x3 Pin header connector, female
- 1 * 2x3 Pin header connector, male
*** Cannot be used at the same time as the case. |
|
|
|
|
|
|
|
|
|
Ardupilot Mega 2.0 Case - TOP Pins entry
|
|
Our Price: $4.99
(Out of Stock)
|
|
|
This is the official case for the APM 2.0 system. It's designed to keep your electronics safe while looking great at the same time! The pins are uncovered and have labels and numbers so that you can keep track of what has been connected and where.
Please note that you can choose a top/side entry case, depending on your current APM 2.0 set up.
This listing is for the TOP pins. (side pins here)
NOTE: This product is compatible with APM 2.0 only! (It will also not fit if you have all the pins installed, specially the ones on the right side...) SEE THIS POST FOR DETAILS
|
|
|
|
|
|
|
|
|
|
Ardupilot Mega 2.0 Case - SIDE Pins entry
|
|
Our Price: $4.99
(Out of Stock)
|
|
|
This is the official case for the APM 2.0 system. It's designed to keep your electronics safe while looking great at the same time! The pins are uncovered and have labels and numbers so that you can keep track of what has been connected and where.
Please note that you can choose a top/side entry case, depending on your current APM 2.0 set up.
This listing is for the SIDE pins. (Top pin here)
** 99% of the APM2 sold by Canada Drones are with side pins. Only special request are with straight (top) pins.
NOTE: This product is compatible with APM 2.0 only! (It will also not fit if you have all the pins installed, specially the ones on the right side...) SEE THIS POST FOR DETAILS |
|
|
|
