Additional Options


Proud sponsor of 
Proud sponsor of 

Proud sponsor of
Home > All Products
Sort By:
Page of 7
DJI S1000 Premium Octocopter + A2 and Z15
DJI S1000 Premium Octocopter + A2 and Z15
Our Price: $6,920.00

The S1000 is finally here!


DJI S1000 Premium Octocopter + A2
DJI S1000 Premium Octocopter + A2
Our Price: $4,750.00

(1)

The S1000 is finally here!


DJI S1000 Premium Octocopter
DJI S1000 Premium Octocopter (no flight controller)
Our Price: $4,299.00

The S1000 is finally here!


DJI ZENMUSE Z15 FOR CANON 5D MARK II / III
DJI ZENMUSE Z15 FOR CANON 5D MARK II / III
Our Price: $3,420.00

The S1000 is finally here!


DJI ZENMUSE Z15 BMPCC
DJI ZENMUSE Z15 BMPCC
Our Price: $2,999.00

  • Built for the BMPCC
  • HDMI-AV/HD module
  • 3-axis rotation control
  • Multiple control modes
  • A total solution
  • Gimbal servo drive module
  • Built in independent IMU module

DJI ZENMUSE Z15 Panasonic GH3
DJI ZENMUSE Z15 Panasonic GH3
Our Price: $2,999.00

  • Another Evolutionary 3-AXIS Professional Gimbal
  • Gimbal Design Customized for the Panasonic GH3
  • Multiple Control Modes
  • Controllable 3-AXIS Rotation Angle
  • Built-in Independent IMU Module
  • Special DJI Gimbal Servo Drive Module
  • HDMI-AV Module
  • Excellent Choice for a DJI Total Solution
OB-6 Hexacopter RTF
OB-6 Hexacopter RTF
Our Price: $2,999.00

The long wait is over... Finally the OB-6 Hexacopter is here! open to read all details!




DJI ZENMUSE Z15 for SONY Sony Nex5/7
DJI ZENMUSE Z15 for SONY Sony Nex5/7
Our Price: $2,999.00

Plain and simple…gone are the days of shaky, unstable footage! Whether you are shooting a movie or commercial, or performing a search and rescue mission, shaky footage is the number one problem plaguing the aerial photography industry. After all, what good is a view from the sky if it’s unusable? Through the use of 3-axis gyros, inertial measurement unit feedback, and special 3-DOF servo drive modules, the Zenmuse line of camera gimbals achieve sub-pixel stabilization. This performance was previously only achieved in the most expensive full-scale helicopter gimbals; most of which cost upwards of $500,000. Now, for less than 1% of that cost, you can achieve perfectly stable footage every flight…even in windy conditions!
OB-6 Hexacopter DIY KIT
OB-6 Hexacopter DIY KIT Edition
Our Price: $1,975.00

The Popular OB-6 Hexacopter offered in a DIY Kit version.




DJI LightBridge
DJI LightBridge
Our Price: $1,560.00

DJI Lightbridge Features
  • 2.4G Full HD Digital Video Downlink
  • Professional Aerial Creation
  • Intermediate Or FPV Flying
  • Mobile Device Support
  • Built in OSD (On-Screen Display)
  • Anti-Interference Technology
  • Multi-Device Operation
  • Advanced Security
DJI Phantom 2 VISION PLUS
DJI Phantom 2 VISION PLUS (NEW)
Our Price: $1,419.00

(16)

This product ships directly form our warehouse, sorry no local pickup available at the moment.

The Phantom 2 Vision+ ushers in a new era of aerial cinematography with its brand new and incredibly stable 3-axis gimbal, combined with the sharp, powerful DJI-designed camera, making professional imaging tools easily accessible to everyone.
DJI A2 Next gen Multi-Rotor Flight Controller
DJI A2 Next gen Multi-Rotor Flight Controller
Our Price: $1,350.00

DJI A2 multi-rotor stabilization controller is a complete flight control system for various multi-rotor platforms for commercial and industrial AP applications. It opens an unprecedented era of precise positioning and perfect flight control in harsh environments for flight control systems.




DJI Phantom 2 H3-3D QuadCopter Ready To Fly
DJI Phantom 2 H3-3D Ready To Fly (NEW)
Our Price: $1,069.00

(8)

The latest DJI Phantom 2 with Zenmuse H3-3D gimbal



picture not updated, should show upgraded motors and props...
ArduCopter Hexa KIT v1.0, Full Electronics - HEAVY LIFT ONE
Our Price: $889.99

ArduCopter Hexa v1.0 KIT - HEAVY LIFT Contains (hardware): (Hexa = 6 MOTORS!) 
  • 1 x ArduCopter Hexa v1.0 Frame
    • 24" Frame (28cm arms)
  • 6 x Motors designed to ArduCopter use, 880kv (biggest one available!)
  • 6 x ESCs designed to ArduCopter use, 30Amp (more headroom than 20Amp ones) 
  • 6 x Propellers designed to ArduCopter use, 10x45 Composite (Gray ones as they flex less)
  • 4 x HighRise 20cm landing gears 
  • 1 x ArduPilot Mega Flight controller board latest version APM2.5
ArduCopter Hexa KIT v1.0, Full Electronics
ArduCopter Hexa KIT v1.0, Full Electronics
Our Price: $799.99

ArduCopter Hexa v1.0 KIT Contains (hardware): (Hexa = 6 MOTORS!) 
  • 1 x ArduCopter Hexa v1.0 Frame
    • 24" Frame (28cm arms)
  • 6 x Motors designed to ArduCopter use, 850kv (can be changed to bigger)
  • 6 x ESCs designed to ArduCopter use, 20Amp
  • 6 x Propellers designed to ArduCopter use, 10x45 (can be changed to bigger)
  • 4 x HighRise 20cm landing gears 
  • 1 x ArduPilot Mega Flight controller board latest version APM2.5
DJI Phantom VISION QuadCopter Ready To Fly
DJI Phantom 2 Ready To Fly
Our Price: $749.00

(6)

This is it! the new Phantom 2 is on Pre-order mode! (no camera/no gimbal version)



Brushless Gimbal 3 Axis for NEX Camera
Brushless Gimbal 3 Axis for NEX Camera
Our Price: $699.00

Aluminium Brushless Gimbal for your Gopro camera. 

More details will be posted soon. 

comes with :
3 x 4114-100T motors (black)
(more power than really needed motor capable of handling 1600g‐2800g (NEX6, NEX7 Size)

Requires 23-24cm ground clearance minimal (level) 

Length 15cm X Width 15cm 

Setup instructions here: 



3DR Y6 Frame Full Kit
3DR Y6 Frame Full Kit
Our Price: $690.00

(1)

3DR Y6 -RTF- FULLY FEATURED UAV DEVELOPMENT PLATFORM

The 3DR Y6 copter is a reliable new offering from 3D Robotics, the 6 motor coaxial configuration has a number of advantages over other multi-rotor configurations:

  • First, co-located motors preserve thrust symmetry in a single motor out scenario. The Y6 keeps flying if an ESC or motor fails mid-air.
  • Second, there are only three arms on the Y6. This translates into being able to carry a greater payload, having to maintain fewer components, as well as providing superior performance in higher wind conditions.
  • Third, the wide front arm offset is perfect for keeping a clear forward view when a camera is attached to the Y6.
  • Finally, the front arms on the Y6 are capable of folding towards the back arm which offers an incredibly compact package for traveling and storage.
jD-Simplex Hexa Multicopter - Full Kit
jD-Simplex Hexa Multicopter - Full Kit
Our Price: $650.00

jD-Simplex Hexa - Full Electronics
Frame Revision A

Our new series of affordable yet sturdy frame kits. FOLD-ABLE TOO!

This kits includes the frame, power distribution board, motors, ESCs, propellers and APM2.5 flight controller as well as all the hardware and wires needed to get it flying.

ArduCopter 2014 3DR Quad KIT, FULL Electronics
ArduCopter 2014 3DR Quad KIT, FULL Electronics
Our Price: $625.00

(3)

Build a 2014 Quad with this do-it-yourself kit! The 2014 upgrade to our popular Quad features gimbal-compatible plates and larger surface area for mounting peripheral components.


DJI 900Mhz Data Link for DJI iPad Ground Station
DJI 900Mhz Data Link for DJI iPad Ground Station
Our Price: $555.00

As a Ground Control Station (GCS), WKM Single Waypoint enables DJI autopilot system WKM the ability to monitor real-time flight state. It is an advanced feature of WKM. Including 3D map, monitor attitude, coordinate, speed and angle of aircraft, monitor signal quality of wireless data link module and power voltage for you. Click Go Mode allows pilot to drag single flight route on 3D map, assign altitude and flight speed to a single destination. Altitude, speed and destination point can be changed on-the-fly with flight path tracking. It is specially designed for high-end WKM users.
DJI Phantom FC-40
DJI Phantom FC-40
Our Price: $549.00

(6)

The Phantom FC40 is the beloved Phantom, all grown up.
It comes with its own built in DJI designed smart camera with 720p/30fps HD video support, and iOS or Android app control.
Using a 2.4G Wi-Fi (for Video) connection, it provides a full FPV experience at up to 100m. (Flight can reach up to 300 meters but video signal will drop)
It’s the ideal choice for those getting started with aerial cinematography.


DJI Phantom QuadCopter Ready To Fly Kit Canada
DJI Phantom QuadCopter Ready To Fly Kit
Our Price: $699.00
Sale Price: $529.00
Savings: $170.00

(51)

The Phantom is a Ready-to-Fly QuadCopter from DJI Innovations, this is their first small sized VTOL multi-rotor QuadCopter in the Ready To Fly market. While the Phantom might be a new addition to DJI's lineup of products in the Ready To Fly market the Flight Controller is not! The Phantom is fitted with the fully integrated and class leading Naza Flight Controller and GPS unit. The Naza GPS Flight Controller has been installed on thousands of Flame Wheel Frames and other multi rotor airframes and is respected as being one of the most dependable and stable Flight controllers in the Multi Rotor world. The Phantom much more than just an attractive Ready To Fly air frame in appearance. The Phantom Ready to Fly Kit can be used for either fun flights or for aerial filming, included with the Phantom is a fixed GoPro mount so you can add a camera from day one and start taking advantage of this extremely stable system.

ArduCopter Quad v1.1 KIT, Full Electronics
ArduCopter Quad v1.1 KIT, Full Electronics
Our Price: $500.00

ArduCopter Quad v1.1 KIT Contains (hardware):
  • 1 x ArduCopter v1.0 Frame
    • 24" Frame (28cm arms)
  • 4 x Motors designed to ArduCopter use, 850kv (can be changed)
  • 4 x ESCs designed to ArduCopter use, 20Amp
  • 4 x Propellers designed to ArduCopter use, 10x45 (can be changed)
  • 1 x ArduPilot Mega Flight controller board latest version APM 2.5
Graupner POLARON EX COMBO Charger
Graupner POLARON EX COMBO Charger
Our Price: $475.00


You need a work beast charger to charge these huge LiPo? We got you covered! This is the ULTIMATE solution.

Graupner is known for their attention to details and extremely performant products. This is why we offer the no compromise POLARON EX COMBO charger.
jD-Simplex Quad Kit, Rev.A
jD-Simplex Quad Kit, Rev.A
Our Price: $460.00

(1)

jD-Simplex Quad Kit, Rev.A

This is first of our new line of simple Quad series called jD-Simplex. Frame can be folded for easier transportation. Folding mechanism is done by intelligent quick lock and additionally you can use Wing nuts to lock arms on their places. It also support several flight-controller boards as also several motors.

For easier installation of power distribution, battery holder under frame can be removed and all internal parts will be exposed.

This frame offers similar features from the 3DR Quad frames but with the added folding arms desing.
Brushless Gimbal 2 Axis for NEX Camera
Brushless Gimbal 2 Axis for NEX Camera
List Price: $459.00
Our Price: $449.00
Savings: $10.00

Aluminium Brushless Gimbal for your Gopro camera.

More details will be posted soon.

comes with :
2 x 4108-130T motors (black)
(more power than really needed motor capable of handling 1600g‐2000g (NEX6, NEX7 Size)

Requires 23-24cm ground clearance minimal (level)

Length 15cm X Width 15cm
weight: 666 grams (excluding the camera of course)

Setup instructions here:



DJI NAZA V2 and GPS Combo Canada
DJI NAZA V2 and GPS Combo
Our Price: $599.99
Sale Price: $439.99
Savings: $160.00

(4)

The new Naza-M v2 Flight controller is here! 
Tune your flying platform to the next level. 

DJI impress again and show us the next innovation and improvement. 
With the latest firmware, new altitude stabilization algorithm and optimized hardware structure, the Naza-M V2 provides better flight performance. The innovative All-in-one design simplifies installation and saves space and weight. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer and barometer in its light and small Main Controller. It can measure flying altitude and attitude and therefore can be used for autopilot/automatic control.
Zenmuse H3‐3D Canada
Zenmuse H3‐3D - stand alone version
Our Price: $425.99

DJI continues innovating, we are excited to release Zenmuse H3‐3D. (yes 3 Axis now for even better stability!)
Another milestone in gimbal innovation, which is designed for the GoPro Hero3.
With its high precision, high stability, lightweight, plug and play features, it is widely used in film and television productions, advertising aerial photography, etc.
Even if the aircraft is in high‐speed flight, it can still stabilize and control the GoPro camera precisely with the
highest stability.
Gen Ace TATTU 6S Lipo 16000mAh
Gen Ace TATTU 6S Lipo 16000mAh
Our Price: $415.00

(1)



In need of serious power? Look no further... CanadaDrones is proud to carry the GenAce TATTU serie.
Made for professionals by professionals.

This pack will be perfect for you large multicopter like the DJI S1000
Replacement Phantom craft
Replacement Phantom craft (nothing else)
Our Price: $590.00
Sale Price: $399.00
Savings: $191.00

(1)

FEATURES
DJI Phantom Craft
DJI Phantom craft only, add your own battery, charger and RC systems to the DJI Phantom QuadCopter.
This is a great way to own a Phantom if you have your own RC system and batteries and don't need the full DJI Phantom kit which comes supplied with a radio, battery and charger.

* this is just for the copter itself... no radio, no charger, no battery...
Graupner POLARON AC/DC 240W Charger 3.0  TFT LCD
Graupner POLARON AC/DC 240W Charger 3.0 TFT LCD
Our Price: $340.00


You need the top of the line all in one charger/power supply to charge your LiPo? Tired of the cheap clone chargers on the market (they can be dangerous!) Protect your investment in LiPo and copter (don't want a bad ballanced battery when you fly expensive gear)

Graupner is known for their attention to details and extremely performant products. This is why we offer the top of the line POLARON AC/DC 240W charger.
It can charge at 8 Amps per channel (can do 2 separate LiPo at 8 Amps each) you can also use a parallel charging board to split these 8 amps to many LiPo (for example charging 4 LiPo at 2 amps each per channel
Brushless Gimbal 3 Axis for GoPro
Brushless Gimbal 3 Axis for GoPro (NEW)
Our Price: $295.00

Gimbal Controller Specifications:

The Original AlexMos (basecam) 3 axis Brushless gimbal controller: Official authorized official version,Can be permanently upgraded.

Compatible with: Gopro 3 & 3+ cameras

ArduCopter 2014 3DR Quad, Motors Kit
ArduCopter 2014 3DR Quad, Motors Kit
Our Price: $285.00

(1)

Build a 2014 Quad with this do-it-yourself kit with motors! The 2014 upgrade to our popular Quad features gimbal-compatible plates and larger surface area for mounting peripheral components.

This kit includes the parts to assemble one Quad frame without any Flight controller system, including motors, propellers, electronic speed controllers (ESCs), power module and GPS mast.

DJI AVL58 (Video TX/RX system)
Our Price: $275.99

(1)

DJI AVL58 FPV System




DJI 2.4G Bluetooth Data Link for DJI iPad Ground Station
DJI 2.4G Bluetooth Data Link for DJI iPad Ground Station
Our Price: $275.99

The DJI 2.4G Bluetooth Data Link is a component for the DJI iPad Ground Station. It features two transceivers to facilitate wireless communication between aircraft and iPad with a range of up to 1148 feet line-of-sight. One transceiver is installed in or on the aircraft and integrates with the flight control system via the CAM bus, the other remains at the ground-end to pick the Bluetooth signal from the iPad. Please note that this kit is a bit heavy for a Phantom to carry but it can be done.




DJI IOSD Mark II
DJI IOSD Mark II
Our Price: $275.99

DJI IOSD MARK II
REAL-TIME FLIGHT DATA, AMAZING FPV FLIGHT EXPERIENCE WITH SAFETY.



Brushless Gimbal 2 Axis for GoPro
Brushless Gimbal 2 Axis for GoPro
Our Price: $309.00
Sale Price: $275.00
Savings: $34.00

(1)

Aluminium Brushless Gimbal for your Gopro camera.

comes with :
2 x 2212-70T motors
(more power than really needed motor capable of handling 150‐300g (Gopro is around 200g)

Need 17-18cm clearance in the most extender setting. Compact mode needs 13-14cm clearance to ground.
width is around 10cm x length is also around 10cm
FRSKY TARANIS Canada
FRSKY TARANIS - 16 CHANNEL, FULL TELEMETRY TRANSMITTER (With X8R)
Our Price: $275.00

(39)

Please welcome the Taranis! it is the revolutionary new transmitter by FrSky
Unprecedented power and features at a very affordable price!

NO US ORDERS PLEASE
APM 2.6
Latest ArduPilot Mega 2.6 - Assembled (SIDE PINS - External compass)
Our Price: $265.00

(8)

This is the LATEST APM version available from 3DRobotics, no clones or cheap stuff!

APM 2.6 Kit (includes uBlox GPS with onboard compass)

SIDE PINS

This new presentation of the ArduPilotMega 2.6 system features all the same goodies as the predecessor, same CPU, same memory, same case, power module... but it comes without magnetometer on the main board (compass)
This sensor is moved to the GPS to allow less interference and more precision.
ArduCopter Hexa KIT v1.0, Frame only
ArduCopter Hexa KIT Frame only
Our Price: $250.00

(1)

jDrones ArduCopter hexa frame kit

Our famous and rigid ArduCopter HEXA frame kit. This frame is continuity on our frame sets and we have been using this frame on hundreds of Hexa kits.
DJI Phantom Replacement Flight Controller (Naza-M)
DJI Phantom Replacement Flight Controller (NAZA-M)
Our Price: $235.00

Created by dji innovations NAZA is a lightweight multi-axis control platform specially designed for aeromodel hobbyists. It is a smalled all-in-one module includes controller, gyroscope, accelerometer and barometer. It has D-Bus support, upgrade support, and extendible port.

Different from WKM for heavy payloads and aerophotography, NAZA not only inherits outstanding flight stability of DJI products, but also provides excellent maneuverability, which gives hobbyists wonderful flight experience.

Pixhawk
Pixhawk
Our Price: $225.00

(5)

Pixhawk is an advanced autopilot system designed by the PX4 open-hardware project and manufactured by 3D Robotics. It features advanced processor and sensor technology from ST Microelectronics® and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle.

DJI Phantom Backpack carrying case
DJI Phantom Backpack carrying case
Our Price: $219.00
Sale Price: $199.00
Savings: $20.00

(10)

Order even if out of stock, more coming every 2-3 weeks!


DJI Phantom 2 GPS Canada
Replacement Phantom 2 GPS Unit (replacement part)
Our Price: $184.00

(1)


This is the stock and official GPS replacement unit from for the DJI.Phantom 2 including the Vision lineup

Will not work on Phantom 1
KYPOM 8000mah 6S 35~70C Lipo Pack
KYPOM 8000mAh 6S 35~70C Lipo Pack
Our Price: $182.00

(1)

When it's time to chose your LIPO we make the choice simpler for you. CanadaDrones selected the KYPOM brand for their excellent track record in performance, quality and reliability. Only A bit more expensive than the "house brands" this delivers far superior experience.

This is your best choice for heavy duty Hexa copter that requires 6S LiPo
APM 2.6
Latest ArduPilot Mega 2.6 - Assembled (SIDE PINS - NO compass)
Our Price: $179.00

This is the LATEST APM version available from 3DRobotics, no clones or cheap stuff!

APM 2.6 Kit (NO GPS version)

SIDE PINS

This new presentation of the ArduPilotMega 2.6 system features all the same goodies as the predecessor, same CPU, same memory, same case, power module... but it comes without magnetometer on the main board (compass)

DJI Phantom GPS Canada
Replacement Phantom 1 GPS Unit (replacement part)
Our Price: $159.00

This is the stock and official Phantom GPS replacement from DJI




Replacement Phantom 2 Vision LiPo battery
Replacement Phantom 2 and Vision LiPo battery
Our Price: $165.99
Sale Price: $139.00
Savings: $26.99

(14)










3DR Y6 Frame
3DR Y6 Frame Only
Our Price: $130.00

3DR Y6 - FRAME ONLY

The 3DR Y6 copter is a reliable new offering from 3D Robotics, the 6 motor coaxial configuration has a number of advantages over other multi-rotor configurations:

  • First, co-located motors preserve thrust symmetry in a single motor out scenario. The Y6 keeps flying if an ESC or motor fails mid-air.
  • Second, there are only three arms on the Y6. This translates into being able to carry a greater payload, having to maintain fewer components, as well as providing superior performance in higher wind conditions.
  • Third, the wide front arm offset is perfect for keeping a clear forward view when a camera is attached to the Y6.
  • Finally, the front arms on the Y6 are capable of folding towards the back arm which offers an incredibly compact package for traveling and storage.