|
|
|
|
|
|
EM-406/uBlox/MTK Adapter Cable 15 cm
|
|
Our Price: $2.00
|
|
|
This is a long communication cable, 15 centimeters, that mates with the EM406, EM401,MTK and uBlox Adapter.
Cut and hack this cable to your needs or use as is.
Ideal if you have a UAV project where the GPS module may be a distance away from the controller board.
The cable has two a 6-pin JST connectors with 1mm pitch. Wired pin 1 to pin 1.
|
|
|
|
|
|
|
|
|
|
EM-406/uBlox/MTK Adapter Cable 10 cm
|
|
Our Price: $2.00
|
|
|
This is a communication cable, 10 centimeters, that mates with the EM406, EM401, MTK and uBlox Adapter. Cut and hack this cable to your needs. The cable has two a 6-pin JST connectors with 1mm pitch. Wired pin 1 to pin 1.
|
|
|
|
|
|
|
|
|
|
EM-406/uBlox/MTK Adapter Cable 20 cm
|
|
Our Price: $2.25
|
|
|
This is a communication cable, 20 centimeters, that mates with the EM406, EM401, MTK and uBlox Adapter. Cut and hack this cable to your needs. The cable has two a 6-pin JST connectors with 1mm pitch. Wired pin 1 to pin 1.
|
|
|
|
|
|
|
|
|
|
EM-406/uBlox/MTK Adapter Cable 35 cm
|
|
Our Price: $2.50
|
|
|
This is an extra long communication cable, 35 centimeters, that mates with the EM406, EM401,MTK and uBlox Adapter.
Cut and hack this cable to your needs or use as is.
Ideal if you have a UAV project where the GPS module may be a distance away from the controller board.
The cable has two a 6-pin JST connectors with 1mm pitch. Wired pin 1 to pin 1.
|
|
|
|
|
|
|
|
|
|
jDrones MediaTEK Backup Battery tray
|
|
Our Price: $14.99
(1)
|
|
|
jDrones MediaTEK 3329 Backup Battery TrayIf you want instant or almost instant 2D/3D locks on your jD-MediaTEK GPS boards. This addon is a must for you. After you add it under jD-MedieTEK 3329 board, it will provide important power to MediaTEK's internal RTC clock system and helps it to keep track on it's current location.
After you power up your main jD-MediaTEK 3329 board it will lock in matter or seconds to closest GPS satellites. Without this board lock times can vary from 30-180 seconds. |
|
|
|
|
|
|
|
|
|
ArduCopter MTEK GPS3329 (better ground plate)
|
|
Our Price: $39.99
(1)
|
|
|
Improved Mediatek MT3329 from jDrones!
Based on same GPS module as original DIYDrones GPS but has some enhancements. Such as better ground planes and optional backup battery board. Better groundplane enhances greatly to get 3D lock and also accuracy of GPS position. If you need even more, groundplane can be easily expanded around board.
Fully compatible with ArduPilot Mega and other boards. With optional backup battery board, tested 3D lock times are average of 1-5 seconds. Without battery board, initial lock times on our tests have been around 20-50 seconds. |
|
|
|
|
|
|
|
|
|
MediaTek MT3329 GPS V2.0
|
|
Our Price: $39.99
|
|
|
The state-of-the-art 66-channel MediaTek MT3329 GPS Engine
High sensitivity: Up to -165dBm tracking, superior urban performance USB/UART Interface
Build-in patch antenna for optimal sensitivity
DGPS(WAAS, EGNOS, MSAS) support (optional by firmware)
Maximum update rate : up to 10Hz (optional by firmware)
RoHS compliant |
|
|
|
|
|
|
|
|
|
3DR GPS LEA-6
|
|
Our Price: $79.99
|
|
|
The next level in GPS!
The device is pretty straight-forward. It has active circuitry for the ceramic patch antenna, rechargeable backup battery for warm starts, and I2C EEPROM for configuration storage. The units will ship pre-configured for ArduPilot Mega use |
|
|
|
