|
|
|
|
|
|
White LED strip (1 segment)
|
|
Our Price: $0.75
|
|
|
This is 1 segment of 3 LED, if you need more than 1 segment continuous please mention it with your order.
Color: White
Features: Comes with adhesive tape backing for easy mounting Flexible enough to be bent at any angle Easy to use. Just peel and stick!
Large voltage input range up to 12V DC! (Great for 2-3S LIPO)
|
|
|
|
|
|
|
|
|
|
Blue LED strip (1 segment)
|
|
Our Price: $0.75
|
|
|
This is 1 segment of 3 LED, if you need more than 1 segment continuous please mention it with your order.
Color: Blue
Features: Comes with adhesive tape backing for easy mounting Flexible enough to be bent at any angle Easy to use. Just peel and stick!
Large voltage input range up to 12V DC! (Great for 2-3S LIPO)
|
|
|
|
|
|
|
|
|
|
Green LED strip (1 segment)
|
|
Our Price: $0.75
|
|
|
This is 1 segment of 3 LED, if you need more than 1 segment continuous please mention it with your order.
Color: Green
Features: Comes with adhesive tape backing for easy mounting Flexible enough to be bent at any angle Easy to use. Just peel and stick!
Large voltage input range up to 12V DC! (Great for 2-3S LIPO)
|
|
|
|
|
|
|
|
|
|
Red LED strip (1 segment)
|
|
Our Price: $0.75
|
|
|
This is 1 segment of 3 LED, if you need more than 1 segment continuous please mention it with your order.
Color: RED
Features: Comes with adhesive tape backing for easy mounting Flexible enough to be bent at any angle Easy to use. Just peel and stick!
Large voltage input range up to 12V DC! (Great for 2-3S LIPO)
|
|
|
|
|
|
|
|
|
|
Blue LED strip IP68 - Waterproof (1 segment)
|
|
Our Price: $1.00
|
|
|
This is 1 segment of 3 50x50 LED super bright, if you need more than 1 segment continuous please mention it with your order comment at checkout otherwise they will be cut
This product is offered for a limited time and limited stock SPECIAL LOW PRICE to test if you like it. It's a new product, heavier as it is molded into silicone to make it more water resistant. Please note that it will not operate at IP68 norm unless you seal it back at the ends. I will most likely also carry the non silicone version soon.
Color: Super bright BLUE
Features: No adhesive tape backing Low flexibility due to the silicone. Need to solder ground wire (Black) to B-R-G pins (yes all 3) and positive wire (Red) to the -> (arrow)
DV12V. recommended, will not run hot (will be warm) |
|
|
|
|
|
|
|
|
|
Yellow LED strip IP68 - Waterproof (1 segment)
|
|
Our Price: $1.00
|
|
|
This is 1 segment of 3 50x50 LED super bright, if you need more than 1 segment continuous please mention it with your order comment at checkout otherwise they will be cut
This product is offered for a limited time and limited stock SPECIAL LOW PRICE to test if you like it. It's a new product, heavier as it is molded into silicone to make it more water resistant. Please note that it will not operate at IP68 norm unless you seal it back at the ends. I will most likely also carry the non silicone version soon.
Color: Super bright YELLOW
Features: No adhesive tape backing Low flexibility due to the silicone. Need to solder ground wire (Black) to B-R-G pins (yes all 3) and positive wire (Red) to the -> (arrow)
DV12V. recommended, will not run hot (will be warm) |
|
|
|
|
|
|
|
|
|
Red LED strip IP68 - Waterproof (1 segment)
|
|
Our Price: $1.00
|
|
|
This is 1 segment of 3 50x50 LED super bright, if you need more than 1 segment continuous please mention it with your order comment at checkout otherwise they will be cut
This product is offered for a limited time and limited stock SPECIAL LOW PRICE to test if you like it. It's a new product, heavier as it is molded into silicone to make it more water resistant. Please note that it will not operate at IP68 norm unless you seal it back at the ends. I will most likely also carry the non silicone version soon.
Color: Super bright RED
Features: No adhesive tape backing Low flexibility due to the silicone. Need to solder ground wire (Black) to B-R-G pins (yes all 3) and positive wire (Red) to the -> (arrow)
DV12V. recommended, will not run hot (will be warm) |
|
|
|
|
|
|
|
|
|
Green LED strip IP68 - Waterproof (1 segment)
|
|
Our Price: $1.00
|
|
|
This is 1 segment of 3 50x50 LED super bright, if you need more than 1 segment continuous please mention it with your order comment at checkout otherwise they will be cut
This product is offered for a limited time and limited stock SPECIAL LOW PRICE to test if you like it. It's a new product, heavier as it is molded into silicone to make it more water resistant. Please note that it will not operate at IP68 norm unless you seal it back at the ends. I will most likely also carry the non silicone version soon.
Color: Super bright GREEN
Features: No adhesive tape backing Low flexibility due to the silicone. Need to solder ground wire (Black) to B-R-G pins (yes all 3) and positive wire (Red) to the -> (arrow)
DV12V. recommended, will not run hot (will be warm) |
|
|
|
|
|
|
|
|
|
White LED strip IP68 - Waterproof (1 segment)
|
|
Our Price: $1.00
|
|
|
This is 1 segment of 3 50x50 LED super bright, if you need more than 1 segment continuous please mention it with your order comment at checkout otherwise they will be cut
This product is offered for a limited time and limited stock SPECIAL LOW PRICE to test if you like it. It's a new product, heavier as it is molded into silicone to make it more water resistant. Please note that it will not operate at IP68 norm unless you seal it back at the ends. I will most likely also carry the non silicone version soon.
Color: Super bright WHITE
Features: No adhesive tape backing Low flexibility due to the silicone. Need to solder ground wire (Black) to B-R-G pins (yes all 3) and positive wire (Red) to the -> (arrow)
DV12V. recommended, will not run hot (will be warm) |
|
|
|
|
|
|
|
|
|
Velcro Strips (by the foot)
|
|
Our Price: $1.00
|
|
|
Velcro strip sold by the foot, self adhesive. Ideal to secure your APM, GPS, Radio, Telemetry to the frame. Also add it to the LiPo and Frame to secure it in place (in addition to the regular LiPo Strap) this will prevent the LiPo to slide and change the Centre of Gravity.
Indicate how many foot you want. 1 = 1 feet.
|
|
|
|
|
|
|
|
|
|
ULN2803
|
|
Our Price: $2.00
|
|
|
1x ULN2803APG ULN2803 TRANSISTOR ARRAY-8 NPN TOSHIBA
Use this transistor array to control your LED strips with U4eake's ShowLeds modifications. DIYDrones forum post with instructions:
Warning, do not apply more than 12 volts... if you are using 4S LIPO in your setup you need to put a 12v regulator!
Thanks to all who participate to this mod!
Datasheet can be found here
|
|
|
|
|
|
|
|
|
|
jD-IOBoard v1.0, MCU controlled IO Board for driving LEDs, Relays, Servos
|
|
Our Price: $17.99
|
|
|
The wait is over! in stock now.
If you need to drive LED strips, LEDs, Lamps, Relays or similar devices jD-IOBoard is the answer for your needs. This board is fully Arduino compatible board and it has 6 high power outputs and can handle all the way 42 Volts and 500mA / output pin.
Board have easy access to FTDI / UART and I2C ports. Among high power outputs there are several TTL level GPIO pins and Analog pins. |
|
|
|
