|
|
|
|
|
|
KYPOM 5100mah 4S 35~70C Lipo Pack
|
|
Our Price: $92.99
|
|
|
When it's time to chose your LIPO we make the choice simpler for you. CanadaDrones selected the KYPOM brand for their excellent track record in performance, quality and reliability. Only A bit more expensive than the "house brands" this delivers far superior experience. This is your best choice for Hexa copter...
|
|
|
|
|
|
|
|
|
|
Turnigy nano-tech 5000mah 4S 35~70C Lipo Pack
|
|
Our Price: $90.99
|
|
|
4S LIPO 5000mah of power! Ultimate capacity! Great for HEXA with large payload. Recommended if you have 880kv motors or more
More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.
In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.
For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance.
|
|
|
|
|
|
|
|
|
|
IMAX B6-AC Charger/Discharger 1-6 Cells
|
|
Our Price: $54.99
(2)
|
|
|
The IMAX B6-AC is a rock solid charger thats able to charge, balance and discharge Lion, LiPo, LiFe (A123), NiCd and NiMH batteries. This is the charger of choice around here, very reliable and priced well. Stocks are limited but we should be able to carry more in a near future.
|
|
|
|
|
|
|
|
|
|
KYPOM 3300mah 3S 35~70C Lipo Pack
|
|
Our Price: $48.99
|
|
|
When it's time to chose your LIPO we make the choice simpler for you. CanadaDrones selected the KYPOM brand for their excellent track record in performance, quality and reliability. Only A bit more expensive than the "house brands" this delivers far superior experience.
|
|
|
|
|
|
|
|
|
|
Turnigy nano-tech 3300mah 3S 35~70C Lipo Pack
|
|
Our Price: $39.99
|
|
|
More than just a fancy name. TURNIGY nano-tech lithium polymer batteries are built with an LiCo nano-technology substrate complex greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance.
In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.
For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance.
|
|
|
|
|
|
|
|
|
|
APM Power Module with XT60 Connectors
|
|
Our Price: $25.99
(1)
|
|
|
APM 2.5 Power Module
The APM 2.5 Power Module is a simple way of providing your APM 2.5 with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum of 2.25A from up to a 4S LiPo battery. The Power Module comes completely assembled with XT-60 connectors, and wrapped in shrink tubing for protection.
|
|
|
|
|
|
|
|
|
|
Replacement Phantom LiPo battery (replacement part)
|
|
Our Price: $24.99
(5)
|
|
|
LiPo 2200mAh replacement for Phantom standard Lipo
|
|
|
|
|
|
|
|
|
|
KYPOM 2500mAh TX Pack
|
|
Our Price: $24.99
|
|
|
When it's time to chose your LIPO we make the choice simpler for you. CanadaDrones selected the KYPOM brand for their excellent track record in performance, quality and reliability. Only A bit more expensive than the "house brands" this delivers far superior experience. Specially created for your Radio TX.
|
|
|
|
|
|
|
|
|
|
AttoPilot Voltage and Current Sense Breakout - 90A
|
|
Our Price: $22.00
(1)
|
|
|
Description: This is a small voltage and current sense PCB. DC current is determined by measuring a voltage drop across a pair of parallel 1 mOhm shunt resistors, then converted to a final analog voltage output by the TI INA-169. Voltage sense is accomplished by scaling to 3.3V ADC range by a precision resistor divider.
The PCB is supplied without leads or connectors. The pad sizes are large enough to accommodate 12 gauge heavy duty leads (see datasheet) but care must be exercised in soldering. Smaller gauge leads are considerably easier to solder without creating shorts.
|
|
|
|
|
|
|
|
|
|
FRSKY - LIPO VOLTAGE SENSOR AND DISPLAY
|
|
Our Price: $13.99
|
|
|
Very handy to show voltages at the field and also with the FrSky telemetry system.
Dimension: 45*21*7mm
Weight: 5.2g
Measurement range: 1S~6S (The first lipo voltage should be more than 3.55V)
Cell voltage display range: 0.20~4.20V
Voltage display resolution: 0.01V
Voltage detection precision: 0.03V
Current of the board: 15.5mA
Operating temperature range: -30℃~70℃
Pixel: 128*64 with OLED display screen The FrSky Lipo Voltage Sensor can be used as a lipo voltage detector. The OLED screen displays total voltage and cell voltages as connected. Two FrSky Lipo Voltage Sensors can be combined to detect up to 12S. |
|
|
|
|
|
|
|
|
|
Parallel Charging Board Balance charge Plate (40A fuse)
|
|
Our Price: $12.99
|
|
|
Parallel Charging Board Balance charge Plate (40A fuse)
Charge and keep balanced 6 batteries at once (Good habit to use exact same brand / capacity together to avoid issues)
|
|
|
|
|
|
|
|
|
|
jDrones custom low noise 5V/3Amp tested uBEC
|
|
Our Price: $8.50
|
|
|
jDrones Low noise 3A / 5V uBEC
This is custom made uBEC for jDrones. We made it extra silent, it's ripple current even close to maximum usage is kept really low.
Perfect to supply clean power to your APM! No more brownout from the motor ESC uBec, this is the definitive solution!
Technical Specs: - Output: 5V / 3Amp
- Input: 6 - 28V
- Size: 11 (W) x 26 (L) x 9mm (H)
|
|
|
|
|
|
|
|
|
|
|
|
LIPO Safe Bag (30cm x 23cm)
|
|
Our Price: $7.99
(1)
|
|
|
The LiPo Guard bad is a hi-tech bag that has the ability to contain a lithium polymer battery fire or charging mishap. Also ideal for storage and transport.
|
|
|
|
|
|
|
|
|
|
Lipo Alarm with Voltage display
|
|
Our Price: $7.99
|
|
|
This 2-8S Cell Battery low voltage alarm and monitoring device features loud twin Piezo "speaker" to notify you once your cells reach a user defined voltage.
You can setup the alarm to sound at a voltage between 2.7v~3.8v Per cell in 0.10v increments by pressing the setting mode button. This unit also features a handy built in LED display that will show the voltage of each cell followed by the overall voltage of the pack.
Great for before flight battery check and a necessity when flying.
|
|
|
|
|
|
|
|
|
|
Lipo Monitor Only (No Alarm)
|
|
Our Price: $6.50
|
|
|
This 1-6S Cell Battery monitoring device will display accurately individual cell voltage as well as overall all cell voltage.
NO ALARM... just display
Great for before flight battery check and bench testing.
|
|
|
|
|
|
|
|
|
|
LIPO Safe Bag (23cm x 18cm)
|
|
Our Price: $5.99
|
|
|
The LiPo Guard bad is a hi-tech bag that has the ability to contain a lithium polymer battery fire or charging mishap. Also ideal for storage and transport.
|
|
|
|
|
|
|
|
|
|
Lipo Alarm Only (No Display)
|
|
Our Price: $5.99
|
|
|
This 2-4S Cell Battery low voltage alarm and monitoring device features loud twin Piezo "speaker" to notify you once your cells reach a user defined voltage.
You CANNOT setup the alarm. The predefined config is as follow: - RED LED will flash when <3.3V. is reached and buzzer will go)
This unit also features a LED array to show number of cell connected (not % remaining) There is no Digital display that will show the voltage of each cell, this is an alarm only.
Great for before flight battery check and a necessity when flying.
|
|
|
|
|
|
|
|
|
|
Temperature Sensor Probe for IMAX B5/B6 Charger
|
|
Our Price: $5.99
|
|
|
Connect to the IMAX-B6/B5 chargers to give you the temperature of your charging batteries. Charge with more confidence whit the IMAX-B6/B5 included temperature alarm.
Still do not let your LIPO batteries without supervision when charging!
|
|
|
|
|
|
|
|
|
|
XT60 Y Cable (Female to Male connectors)
|
|
Our Price: $3.50
|
|
|
This Y XT60 cable has one Female mated with two Male connectorsit will allow you to connect two LIPO batteries in parallel
|
|
|
|
|
|
|
|
|
|
Dean Y Cable (Female to Male connectors)
|
|
Our Price: $3.50
|
|
|
This Y Dean cable has one Female mated with two Male connectorsit will allow you to connect two LIPO batteries in parallel
|
|
|
|
|
|
|
|
|
|
XT60 Connectors pair
|
|
Our Price: $2.50
(1)
|
|
|
XT60 Connectors pair. Made from high-temp Nylon and gold plated spring connectors. The XT60 ensures a solid high-amp connection, perfect for applications up to and beyond 65A constant.
Contains: One Male + Female
|
|
|
|
|
|
|
|
|
|
HXT 4mm Connectors pair
|
|
Our Price: $1.99
|
|
|
This is a great way to avoid power shorts.
Rated to around 93AGold connectors on their own are notorious for creating a short circuit and looking messy. Use these to keep your connections safe and looking neat!
Compatible with Nano-tech batteries from HK.
An excellent replacement for Deans T-connectors!
Good for wire up to 10AWG thickness.
Easier to solder and a stronger connection than Deans T-plugs or XT60
Contains: One Pair of connector (2 pieces) |
|
|
|
|
|
|
|
|
|
Velcro Strips (by the foot)
|
|
Our Price: $1.00
|
|
|
Velcro strip sold by the foot, self adhesive. Ideal to secure your APM, GPS, Radio, Telemetry to the frame. Also add it to the LiPo and Frame to secure it in place (in addition to the regular LiPo Strap) this will prevent the LiPo to slide and change the Centre of Gravity.
Indicate how many foot you want. 1 = 1 feet.
|
|
|
|
