Additional Options

Proud sponsor of 

Proud sponsor of
Click for the BBB Business Review of this Hobby & Model Construction Supplies - Retail in Mississauga ON

  Home >  Parts >

Motor Multi Mount single set
Motor Multi Mount single set

Alternative Views:

Our Price: $22.00

Quantity in Stock:(Out of Stock)
Availability: Usually Ships in 1 to 2 Business Days

Anti-Vibration multicopter motor mount

Best way to get rid of vibrations is to use anti-vibration mounts on your motors. If you want to have nice and smooth operation on your multicopters, this is your choice.

Mounts are custom made for you and they have all parts needed to reduce vibrations that your motors/propellers might cause.

This mount can be used for coaxial setups and several different arm types.

Example arm types are: Round 10mm, 12mm / Square 10mm, 12mm, 15mm

** Doesn't fit the 3DR Arms without modification... you will need longer screws (35mm counter screw) and rotate the bottom part 90 degrees (easy!)...

1 set contains:
  • 4 x custom rubber grommet
  • 4 x custom alu spacers (may be filled down 1-2 mm to make them fit better if too much play exits)
  • 4 x M3*12 washerhead screws
  • 4 x lock washers
  • 4 x M3 nuts
  • 2 x M3*12mm screws, Black
  • 2 x M3*20mm screws, Black
  • 1 x MultiMount upper block
  • 1 x MultiMount lower block

Download PDF Installation manual from HERE.

Share your knowledge of this product. Be the first to write a review »