Additional Options


Proud sponsor of 

Proud sponsor of
Click for the BBB Business Review of this Hobby & Model Construction Supplies - Retail in Mississauga ON
Home > Air Frames > jDrones platforms >  Parts
Sort By:
Page of 1
Washer M3 Rubber Black
Washer M3 Rubber Black, (Qte: 1pcs)
Our Price: $0.20


Rubber M3 washer. Color: Black
Qte of: 1 pcs

*Picture shows more but this price is just for 1 rubber washer.




Velcro Strips (by the foot)
Velcro Strips (by the foot)
Our Price: $1.00

(4)

Velcro strip sold by the foot, self adhesive.
Ideal to secure your APM, GPS, Radio, Telemetry to the frame.
Also add it to the LiPo and Frame to secure it in place (in addition to the regular LiPo Strap) this will prevent the LiPo to slide and change the Centre of Gravity.

Indicate how many foot you want.
1 = 1 feet (soft and rough sides).







M3 White Nylon Hex Nuts (qty 10)
Our Price: $2.20

(3)


M3 Nut
Size: M3
Type: Hex
Material: Nylon
Packing: 10 qty / bag
M3 PolyCarbonate Hex Nuts (qty 10)
Our Price: $2.20


M3 Nut
Size: M3
Type: Hex
Material: PolyCarbobate
Packing: 10 qty / bag
M3x10mm White Nylon Screws (qty 10)
Our Price: $2.20

(3)

M3 x 10mm, Nylon screw. Color: Natural/White
Bag of: 10 pcs



M3x6mm White Nylon Screws (qty 10)
Our Price: $2.20

(1)

M3 x 6mm, Nylon screw. Color: Natural/White
Bag of: 10 pcs



Washer M3 Nylon/Natural, (Qte: 10pcs)
Our Price: $2.20


M3 Nylon washer. Color: Natural
Bag of: 10 pcs




Washer M3 Nylon Black, (Qte: 10pcs)
Our Price: $2.20


M3 Nylon washer. Color: Black
Bag of: 10 pcs




M3x6mm Black Nylon Screws (qty 10)
Our Price: $2.25

Set of 10 M3 by 6mm black Nylon screws





M3x20mm White Nylon Screws (qty 10)
Our Price: $2.70

(1)

M3 x 20mm, Nylon screw. Color: Natural/White
Bag of: 10 pcs



Velcro Battery Strap
Our Price: $2.99

(1)

Official CanadaDrones Velcro Battery Strap. Will fit any frame. extra long to support 6S LiPo





Hexagonal Spacer, M3x10, Female-Female, 10pcs
Our Price: $2.99

Hexagonal Spacer
Size: M3 x 10mm
Type: Female-Female
Material:Nylon
Packing:10 qty / bag
Hexagonal Spacer, M3x10, Male-Female, 10pcs
Our Price: $2.99

(1)

Hexagonal Spacer
Size: M3 x 10mm
Type: Male-Female
Material:Nylon
Packing:10 qty / bag
Hexagonal Spacer, M3x12, Female-Female, 10pcs
Our Price: $2.99

Hexagonal Spacer
Size: M3 x 12mm
Type: Female-Female
Material:Nylon
Packing:10 qty / bag
Hexagonal Spacer, M3x12, Male-Female, 10pcs
Our Price: $2.99

(1)

Hexagonal Spacer
Size: M3 x 12mm
Type: Male-Female
Material:Nylon
Packing:10 qty / bag
M3x25mm White Nylon Screws (qty 10)
Our Price: $3.00

(1)

M3 x 25mm, Nylon screw. Color: Natural/White
Bag of: 10 pcs



M3x20mm PolyCarbonate Screws (qty 10)
Our Price: $3.00

M3 x 20mm, PolyCarbonate screw. Color: Clear
Bag of: 10 pcs



Hexagonal Spacer, M3x15, Female-Female, 10pcs
Our Price: $3.10

Hexagonal Spacer
Size: M3 x 15mm
Type: Female-Female
Material:Nylon
Packing:10 qty / bag
Hexagonal Spacer, M3x15, Male-Female, 10pcs
Our Price: $3.10

Hexagonal Spacer
Size: M3 x 15mm
Type: Male-Female
Material:Nylon
Packing:10 qty / bag
Hexagonal Spacer, M3x20, Female-Female, 10pcs
Our Price: $3.20

Hexagonal Spacer
Size: M3 x 20mm
Type: Female-Female
Material:Nylon
Packing:10 qty / bag
Hexagonal Spacer, M3x20, Male-Female, 10pcs
Our Price: $3.20

Hexagonal Spacer
Size: M3 x 20mm
Type: Male-Female
Material:Nylon
Packing:10 qty / bag
Hexagonal Spacer, M3x25, Female-Female, 10pcs
Our Price: $3.20

(1)

Hexagonal Spacer
Size: M3 x 25mm
Type: Female-Female
Material:Nylon
Packing:10 qty / bag
Hexagonal Spacer, M3x25, Male-Female, 10pcs
Our Price: $3.20

(3)

Hexagonal Spacer
Size: M3 x 25mm
Type: Male-Female
Material:Nylon
Packing:10 qty / bag
M3x25mm PolyCarbonate Screws (qty 10)
Our Price: $3.50

M3 x 25mm, PolyCarbonate screw. Color: Clear
Bag of: 10 pcs
Dome Center Upgrade SET
Our Price: $6.75

ArduCopter Quad, Dome Center upgrade set.

Set contains: Laser CUT Upper & Lower rings, 2 x M3x20 Polycarbonate Screw, 4 x M3 Polycarbonate nut
ArduCopter Carrier plate, v1.0, Black
Our Price: $8.00

ArduCopter Carrier plate (Ideal for X1 frame but compatible with any frames)

Size: 80 x 80 mm
Thickness: 1mm
Material: FiberGlass, black
Qty: 1 pcs
ArduCopter Carrier plate, v1.0
Our Price: $8.50

ArduCopter Carrier plate, v1.0 (qte: 1 piece)

Features
Replacement ArduCopter carrier plate, v1.0 for Arducopter.




5V/3Amp uBEC tested
jDrones custom low noise 5V/3Amp tested uBEC
Our Price: $8.50

(8)


jDrones Low noise 3A / 5V uBEC (switching regulator)

This is custom made uBEC for jDrones. We made it extra silent, it's ripple current even close to maximum usage is kept really low.

Perfect to supply clean power to your APM! No more brownout from the motor ESC uBec, this is the definitive solution!

Technical Specs:
  • Output: 5V / 3Amp
  • Input: 6 - 23V (will tolerate 6S for short duration but is not recommended for prolonged use)
  • Size: 11 (W) x 26 (L) x 9mm (H)
Motor Mount single set
Our Price: $8.75

ArduCopter / QuadCopter MotorMount, full set for single motor. This MotorMount has designed for 1/2" alu arm.

Packet contains:
  • 1 x MotorMount Upper, all 16/19mm motors fits on it
  • 1 x MotorMount Lower
  • 1 x LED Cover/LED Holder
  • 1 x M3 Metal Washer
  • 1 x M3 Nylon Washer
  • 1 x M3 x 25mm Metal screw
  • 1 x Rubber "bumber"
  • 2 x M3 x 25mm PolyCarbonate Screw
  • 2 x M3 PolyCarbonate Nut
  • 3 x M3 x 6mm Motor screw
Quad copter needs 4 of these, Hexa 6 pcs. You need to make only one M3 trough hole to your arm to mount this
ArduCopter Carrier plate, Type 2
Our Price: $9.33

ArduCopter Carrier plate, Type 2 (qte: 1 piece)

ArduCopter Carrier plate for X setups. With this carrier board you can easily mount your ArduCopter flight electronics in + or x configurations. It allows you easily to rotate electronics with 45 degrees
ArduCopter Arm SET(2) 28cm (Type 1)
Our Price: $9.50

NEW Arms, thicker (0.8mm instead of 0.4mm), will not bent like the old ones!

Features

Set of 2 ArduCopter Arm 28 cm long Half Holes (Type 1) 

(Picture shows 4 arms but this product is for only 2 arms) 

3mm holes on both ends, two holes are cut in the arm to allow cables in and out of the holes. 
Made from lightweight aluminium. Replacement arms for Arducopter.
ArduCopter Highrise landing gear 20cm
ArduCopter Highrise landing gear 20cm
Our Price: $9.99

Highrise landing gear for ArduCopter frames Tri, Quad and Hexa frames. This landing gear gives 20cm of space below motor arms. 

Usage: Mount around your armtubes and lock with mount screws provided with the packet.



Sonar Mount Version 2 (Long)
Sonar Mount Version 2 (Long)
Our Price: $9.99

(1)

Fits all MaxSonar products sold by 3D Robotics and Canada Drones. 
Keeps your sonar away from electronics. 
Mounts on the Original Arducopter, 3DR, X1 (drilling required) 

Includes all necessary hardware to mount on 3DR-Quad frame, for other frames (hexa or home made) you may need to secure it with tie-wraps. 



Sonar Mount Hexa
Sonar Mount for Hexa
Our Price: $9.99

(1)

Fits all MaxSonar products sold by 3D Robotics and Canada Drones. 
Keeps your sonar away from electronics. 
Mounts on the Original HEXA Arducopter but specifically made for the 3DR HEXA

This mount will not fit on a QUAD

Includes all necessary hardware to mount on 3DR-Quad frame, for other frames (original or home made) you may need to secure it with tie-wraps or drill holes. 



ArduCopter Carrier plate, v1.0, Carbon Fiber
Our Price: $11.00

ArduCopter Carrier plate (Ideal for X1 frame but compatible with any frames)

Size: 80 x 80 mm
Thickness: 1mm
Material: Carbon Fiber
Qty: 1 pcs
Original Quadcopter Power Distribution Board
Our Price: $12.00

Power Distribution for Quad Copters, fits Original ArduCopter Quad. 

Includes:
  • Power Distribution PCB (Rev.D)
  • 20 Pin 90 deg Pin header
  • 4 pin 20 awg signal cable
  • 2 pin 20 awg signal cable
jDrones MediaTEK Backup Battery tray
jDrones MediaTEK Backup Battery tray
Our Price: $14.99

(1)

jDrones MediaTEK 3329 Backup Battery Tray

If you want instant or almost instant 2D/3D locks on your jD-MediaTEK GPS boards. This addon is a must for you. After you add it under jD-MedieTEK 3329 board, it will provide important power to MediaTEK's internal RTC clock system and helps it to keep track on it's current location. 

After you power up your main jD-MediaTEK 3329 board it will lock in matter or seconds to closest GPS satellites. Without this board lock times can vary from 30-180 seconds. 
ArduCopter Arm SET 28cm (Type 1)
Our Price: $18.99

NEW Arms, thicker (0.8mm instead of 0.4mm), will not bent like the old ones!

Features

Set of 4 ArduCopter Arm 28 cm long Half Holes (Type 1)
3mm holes on both ends, two holes are cut in the arm to allow cables in and out of the holes. 
Made from lightweight aluminium. Replacement arms for Arducopter.
ArduCopter Arm SET 28cm half holes (Type 2)
Our Price: $18.99

Features
Set of 4 ArduCopter Arm 28 cm long Half Holes (Type 2)
3mm holes on one end, ONE holes is cut in the arm to allow cables in and out near the motor, the other end cable will exit from arm end. 
Made from lightweight aluminium (thin). Replacement arms for Arducopter.

Packet contains: 4 x 28 cm Arms, Style 1 ( 2 x 3mm holes, 1 x cable holes )
ArduCopter Hexa Main frame plate, v1.0
ArduCopter Hexa Main frame plate, v1.0
Our Price: $19.00

ArduHexa Carrier plate, v1.0 (qte: 1 piece)

Features
Replacement for the HEXA frame plate 
Get two and start building your hexacopter.




Motor Multi Mount single set
Motor Multi Mount single set
Our Price: $22.00

Anti-Vibration multicopter motor mount

Best way to get rid of vibrations is to use anti-vibration mounts on your motors. If you want to have nice and smooth operation on your multicopters, this is your choice.




NEW jDrones 20amp ESC
New jDrones 20A ESC (updated Firmware)
Our Price: $22.99

NEW version with updated firmware, smoother, no more clicking noise.

jDrones brushless ESC 20 Amp/ 35Amp (burst). ArduCopter specific. 2Amp Liner BEC onboard. Compatible with programming cards like Turnigy.

This ESC is for people who want to have even bigger motors on their Tri/Quads/Hexas


APM Power Module
APM Power Module with XT60 Connectors
Our Price: $25.99

(7)

APM 2.5 Power Module

The APM 2.5 Power Module is a simple way of providing your APM 2.5 with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum of 2.25A from up to a 4S LiPo battery. The Power Module comes completely assembled with XT-60 connectors, and wrapped in shrink tubing for protection.
NEW jDrones 30amp ESC
New jDrones 30A ESC (updated Firmware)
Our Price: $27.99

(2)

NEW version with updated firmware, smoother, no more clicking noise.

jDrones brushless ESC 30 Amp/ 35Amp (burst). ArduCopter specific. 2Amp Liner BEC onboard. Compatible with programming cards like Turnigy.

This ESC is for people who want to have even bigger motors on their Tri/Quads/Hexas


ArduCopter Crash set
Our Price: $30.00

ArduCopter Crash kit contain parts that you might use if you have experienced hard crash with your Original Quad copter. 

It can also be used with the Hexa but you will have no use of the DomeCenter Ring and will need to cut the LandingGear Fin. 


Contents: 
2 x M3x25 Hexagonal Spacer, Nylon
5 x M3x6mm Screw, Nylon
10 x M3x20mm Screw, Nylon
10 x M3x20mm Screw, PolyCarbonate
10 x M3x25mm Screw, PolyCarbonate
10 x M3 Nut, Nylon
10 x M3 Nut, PolyCarbonate
4 x M3 Nut, Steel
2 x M3x20mm Screw, Steel
2 x M3x25mm Screw, Steel
2 x Rubber Pads
1 x Alu Arm
1 x LandingGear Fin
1 x DomeCenter Ring, Upper
1 x MotorMount, Upper
1 x MotorMount, Lower
3DR uBlox GPS with Compass Kit
3DR uBlox GPS with Compass Kit (for APM 2.6 and up)
Our Price: $92.00

(6)

This new design incorporates the HMC5883L digital compass, providing a convenient method of mounting the compass away from sources of interference that may be present in the confines of the vehicle. This is our best GPS module, significantly outperforming the Mediatek GPS due to the larger antenna and next-gen chipset. An excellent solution for multicopters and rovers in particular, where GPS accuracy is paramount. It features active circuitry for the ceramic patch antenna, rechargeable backup battery for warm starts, and I2C EEPROM for configuration storage. The units ship pre-configured for use with 3DR APM 2.6 autopilot; the configuration file is available in the repository.