Additional Options

Proud sponsor of 

Proud sponsor of
Click for the BBB Business Review of this Hobby & Model Construction Supplies - Retail in Mississauga ON

  Home > All Products >

Tarot T-2D Brushless gimbal (3DR edition)
Tarot T-2D Brushless gimbal (3DR edition)

Our Price: $245.00

Quantity in Stock:(Out of Stock)
Availability: Usually Ships in 1 to 2 Business Days
Product Code: 3DR-TAROT-2D


Tarot T-2D Brushless Gimbal Kit

The two-axis Tarot Brushless Gimbal uses cutting-edge gyroscope technology to ensure you get crisp, stable images from your 3DR drone. The T-2D automatically compensates for the slightest movement, enabling you to capture rock-steady video even in windy weather. Designed to accommodate the GoPro HERO 3, the T-2D Brushless Gimbal you get from 3DR is customized: pre-wired, pre-calibrated and configured to work with your 3DR copter. The T-2D offers manual camera control from your controller's Tilt knob, but the model you get from 3DR is also specially configured to allow the autopilot to control the camera automatically, which is critical to using applications like 3PV Follow Me mode on IRIS+. This T-2D ships pre-assembled by 3DR, and includes the mounting plate and hardware for the IRIS.

Tarot Brushless Gimbal Kit includes

  • Mounting plate to mount the gimbal to 3DR IRIS only
  • Tarot brushless gimbal with IRIS and IRIS+ mounting plate– comes pre-assembled and pre-configured to work with your copter's RC for in-flight camera control
  • IRIS and IRIS+ mounting hardware

Documentation and setup instructions


  • Support GoPro HERO3 video auxiliary output (cable sold separately)
  • Supply voltage polarity protection and voltage compensation
  • Motor drive end short-circuit protection
  • Sensitivity parameter adjustment and software 3D pose show through PC connection
  • Adjustable rocker rate mode and position mode
  • Supported receiver type : conventional receiver, S-BUS receiver, DSM2/DSMJ/DSMX receiver
  • Support for remote devices : PPM/PCM/2.4G
  • Working voltage: DC 7.4V ~ 14.8V (Recommended 12V, three lithium battery)
  • Working current: 200 mA-500 mA (power supply voltage and the motor related)
  • Working environment temperature: -15 ℃ ~ 65 ℃
  • Processor: Dual 32-bit high-speed ARM core processor
  • Sensor: Three axis MEMS gyroscope and MEMS accelerometers
  • Maximum angular rate : 2000 ° / sec
  • Control frequency: 2000 Hz
  • Motor drive frequency: 20 kHz (no noise smoothing driven)
  • Control accuracy : 0.1 ° (Pixel Grade)
  • Control angle range : -45 ° ~ 45 ° (roll), -135 ° ~ 90 ° (tilt)
  • Pose solver algorithms : PTZ dedicated brushless motor decoupled EKF algorithm
  • Shooting equipment : GoPro HERO3
  • Weight without camera : 200 g

Battery usage: The Tarot gimbal should be powered by a 2S or 3S LiPo battery only. If you plan to use 4S, please use a voltage regulator to ensure the voltage stays within safe operating limits.

Note: Tarot gimbal does not include the GoPro camera. IRIS+ includes a set of tall legs to use with the Tarot Gimbal. Users with an original-edition IRIS will need to purchase a set of tall legs to use the gimbal (available soon)

Share your knowledge of this product. Be the first to write a review »