If you plan to have multiple devices connected on your telemetry output, you need to have distribution board to separate RX/TX signals between multiple devices like MiniOSD, IOBoard, 3DR Radio telemetry module etc. Have this board connected to your MAVLink capable Flight controller and you can easily connect several devices without having problems on their data reception.
Telemetry board has IN/OUT connectors as DF13-5P and 3 x 4 pin headers. If you have OSD and/or IOBoard connected and no telemetry modem, you can leave small jumper on. If you have OSD and/or IOBoard and telemetry modem connected, take out jumper to have normal operation on telemetry modems
The kit consists of:
- 1 x Assembled jD-Telemetry board
- 1 x 10cm extension cable