|
|
|
|
|
|
Xbee 900 Telemetry Kit
|
|
Our Price: $175.00
|
|
|
In this kit you will find everything you need to add telemetry features to your aircraft set up. The Xbee modules come paired up and ready to use! Included with this kit:
- 1x XtreamBee Board (The one manufactured by DIYDrones!), including the two female connectors and right angle connectors.
- 1x XBee-PRO 900 extended range module w/ RPSMA connector
- 1x XBee-PRO 900 extended range module w/ wire antenna
- 1x XtreamBee USB Adapter (USB adapter for the Xbee module!)
- 1x Duck antenna optimzed for 900Mhz
- 1x Xbee-Oil Pan connector cable
|
|
|
|
|
|
|
|
|
|
3DR Radio Telemetry Kit - 915 Mhz
|
|
Our Price: $79.99
(2)
|
|
|
3DR Radio telemetry systemThe 3DR Radio telemetry system is designed as an open source Xbee replacement radio set, offering a lower price, longer range (approx one mile) and superior performance to Xbee radios. It’s available in 915Mhz in the following configurations: serial board (for the air) and USB (for the ground).
|
|
|
|
|
|
|
|
|
|
ArduStation - Assembled
|
|
Our Price: $79.99
|
|
|
New Portable Open-Source Ground Station (Arduino and Xbee Based).
Your robot's best friend!
NOTE: Comes assembled and code loaded!
|
|
|
|
|
|
|
|
|
|
ArduStation
|
|
Our Price: $59.99
|
|
|
New Portable Open-Source Ground Station (Arduino and Xbee Based).
Your robot's best friend!
NOTE: Some assembly required!
|
|
|
|
|
|
|
|
|
|
XtreamBee USB Adapter (No XBee included)
|
|
Our Price: $28.99
|
|
|
This is a simple to use, USB to serial base unit for the XBee line. Plug the unit into the XBee Explorer, attach a mini USB cable, and you will have direct access to the serial and programming pins on the XBee unit.
Unit is BLUE now not Green
|
|
|
|
|
|
|
|
|
|
XtreamBee Board (No XBee included)
|
|
Our Price: $28.99
|
|
|
This is the most advanced and competitive XBee interface board you will find! It's breadboard compatible, has 4 status LED's (one selectable to display ASC or RSSI), built-in 3.3V power regulator, configuration solder jumpers and an unique feature that allows you set the device as Master or Slave FTDI mode with a simple slide of a switch!
|
|
|
|
|
|
|
|
|
|
Antenna 900MHz RP-SMA 3.1dBi
|
|
Our Price: $12.00
|
|
|
This is a great 868MHz-928MHz antenna. Ideal for xBee 900 modules, can be rotated and tilted |
|
|
Features
Operation frequency: 868MHz-928MHz. VSWR: 2. Gain: 3.1dBi. Height: Whip: 6.772" (169mm). Connector: RP-SMA. Type: Whip: Whip: 1/8 Whip: Swivel, Tilt (Right Angle). |
|
|
|
|
|
|
|
|
|
Telemetry cable, 4 pin, 10cm
|
|
Our Price: $4.00
|
|
|
Name: Telemetry cable, 4pin -> open
Colors: Black, Red, Yellow, Yellow
Length: 10cm
Usage: This cable is ideal cable to connect your XtremeBee or other XBee adapter to your ArduCopter,
|
|
|
|
|
|
|
|
|
|
Telemetry cable (black/red)
|
|
Our Price: $3.50
|
|
|
With this custom cable you can connect your xbee set up to the telemetry port on the "Oil Pan" IMU without having to use several jumper cables! This cable has 4 pins to 4 pins (not individual ones)
|
|
|
|
|
|
|
|
|
|
Telemetry adapter cable for APM 2.5 (Radio, OSD)
|
|
Our Price: $2.50
|
|
|
This cable is an adapter between any items that have FTDI pin out configurations (MinimOSD, Air side radios, etc) and a Hirose DF13 5 position connector receptacle (APM 2.5, PX4 FMU).
Basically this cable lets you connect your APM 2.5 board with telemetry, OSD boards or Xbee adapters. Cable length is 15cm.
|
|
|
|
|
|
|
|
|
|
2mm 10pin XBee Socket
|
|
Our Price: $1.25
|
|
|
This is a 10-pin socket with 2mm pitch that mates with the popular XBee radio from Digi. Use this small part to avoid having to solder your precious radio to a PCB.
Please Note: This item is sold singly, not in pairs.
|
|
|
|
