Additional Options

Proud sponsor of 

Proud sponsor of

  Home > Telemetry >

XtreamBee Board (No XBee included)
XtreamBee Board (No XBee included)

Alternative Views:

Our Price: $28.99

Quantity in Stock:(Out of Stock)
Availability: Usually Ships in 1 to 2 Business Days

This is the most advanced and competitive XBee interface board you will find! It's breadboard compatible, has 4 status LED's (one selectable to display ASC or RSSI), built-in 3.3V power regulator, configuration solder jumpers and an unique feature that allows you set the device as Master or Slave FTDI mode with a simple slide of a switch! 

In master mode you will be able to attach any USB FTDI cable/board and send/receive data like the rest of the average XBee adapters do (normal use mode), but if you slide the switch to "Slave mode" you will be able to attach the XtreamBee to any FTDI compatible device, like Arduinos, ArduIMU and Ardupilots. So you only need two XtreamBees, to create the Master-Slave connection enabling two-way wireless FTDI communication  (or one XtreamBee set in "Slave Mode", if you already have another third party XBee adapter). You can even tweak the board to emulate in a wireless fashion a  CTS and RTS signals. 

-Includes 2 x 2 mm female receptor headers to correctly place the XBee module. 
-Includes 1x right angle 6 position male pin headers. 
-3.3V regulator built-in. 
-ON Led, Tx/Rx Led's, ASC and RSSI Led (Jumper selectable).
-Master/Slave selector
-Solder jumper allows you to supply the board directly with 3.3V (Only recommended in Slave Mode). 
-Breadboard compatible! 
-Screw holes for easy mounting. 
-Weight: 0.1 oz; 3 g
-Xbee module not included.

-Eagle Files!
-Set up instructions.

Average Rating: 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
Works as advertised September 28, 2013
Reviewer: Michael Pede from Port Coquitlam, BC Canada  
I got it working quite well with the APM2.5 board and an OpenBee 433Mhz system.

One thing of note: power the APM board from battery.  By default, if it's connected to your PC via USB, it will try to communicate to it that way instead of using the Xbee/OpenBee system.

Was this review helpful to you?